Oil Change Maintenance Of Pipe Thread Lathe
Oil Change Maintenance Of Pipe Thread Lathe
Pipe thread lathes are in need of oil change maintenance. Many people have doubts about this. Let me answer it for you. The equipment for lathes should be the same as that for your car. Pay attention to the hygiene on the countertop so that dust and iron filings cannot enter the track. If dust and iron filings enter, it is likely to cause poor accuracy and feel heavy. Therefore, the oil should be changed once a month in the previous period, once every three months in the year, and three times in the first three months. In addition, there are a few points to note:
1. Check whether the air blowing of the taper hole in the spindle of the lathe is normal, scrub the taper hole in the spindle with a clean cotton cloth, and spray light oil.
2. Check the air pressure, loosen the adjustment knob, and adjust the pressure according to the right-hand pressure increase and left-hand pressure reduction principle.
3. Check the oil level of the pneumatic three-piece, which is about 2/3 of the height of the entire tubing. Drain the water and gas in the pneumatic three-piece oil filter tank every day.
4. See if the cooling wave in the coolant tank is sufficient, not increase in time.
5. Check the lubricating oil level to ensure the machine is lubricated.